Page 3 - 20
TL49J
TIE DOWN LUGS
Check for wear and tear. Also check for damage. There are two lugs on each side attached to the tow-
bar and two other lugs on each side of the rear outriggers. Current machines have a single box towbar.
Earlier models had an “A” frame towbar with one individual lug welded to each side of the towbar.
Note
The lugs are used to secure the platform when being stowed or transported. They are not designed
for lifting the access platform.
BATTERY & CHARGING
I
f the machine is fitted with a fully automatic charger,
refer to the information provided here. If the machine
is fitted with a different type of charger, refer to docu
-
mentation included with the unit.
The fully automatic charger is
•
Waterproof.
•
Capable of charging batteries when the motor is
running.
•
Dual voltage with auto select and indicator light
to show voltage selected.
•
Short circuit protection.
•
Designed to withstand heavy vibration.
•
Modular design. The black box will control 12 V,
24 V and 48 V at 30 A outputs with the
appropriate transformer.
•
Auto-boost to enable batteries to be kept in
optimum condition when machine is in storage
with the charger connected.
OPERATION
The LED’s are visible on the battery charger.
• 50% green LED blinking – indicates that the batteries are 0% to 50% charged.
• 50% solid green LED light and 75% green LED blinking – indicates that the batteries are 50% to
75% charged.
• 50% solid green LED light, 75% solid green LED light and green LED blinking – indicates that the
batteries are 75% to 100% charged.
• 50% solid green LED light, 75% solid green LED light and a 100% solid green LED light – indicates
that the charge cycle is complete.
The fuse used is a 24 V (15 A) fuse.
SERVICE AND REPAIR
Figure 3-22
: Tie down lugs location.
Figure 3-23
: The charger (black box) shown
has a 110 V plug. To operate on 240 V, re-
place plug.
Tie Down
Lugs
