Notes on Installation
1. Please measure the front windshield viewing area, do not
restrict the drivers view of the road ahead. Install the device
below the rear view mirror (the centre of the front windshield).
We recommend that the sky and the land occupied by the
screen 50%, fix the car bracket and then adjust the device so
that the lane is aligned with the screen. The correct installation
enables the device to maximize the accuracy of LDWS.
2. Rear camera should be installed at the central, higher right
position of the front windshield to have the best viewing. After
installation, make sure the lens must be positioned at the front
direction, the lens in the wrong direction will cause the video
screen upside down.
3. Make sure that the lens is within the wiping zone of the
windscreen wiper to ensure a clear view even when it rains*
4. Do not touch the lens with your fingers. Finger grease residue
may be left on the lens and will result in unclear videos or
pictures. Clean the lens on a regular basis.
5. Do not install the device on a tinted film window. Doing so may
damage the tint film.
6. Do not restrict the drivers view of the road ahead.
7. This product is suitable for light windshield or light colour heat-
resistant film windows, the video quality will be reduced if the
camera(s) are installed on dark tinted windows.
8. Use the products supplied, failure to use the correct power
cable will invalidate your warranty.
* Do not mount the dash cam in Zone A as this may contravene local
traffic laws.
RHD
LHD
6
DVR-5HD V2.2 09/17
