mode after 10 sec.”
This means the system will enter
Motion and Collision Detection automatically in 10
seconds, and then LCD screen turn off after 30 seconds
(the device will turn off the screen temporarily, but still in
standby detection status. Press any button to turn on the
operation screen).
- In the Motion and Collision Detection mode, when the
device detects any motion in front of lens, or when the
device detects collision, the automatic record will be
activated.
- In this mode, when the device detects collision or any
motion in front of lens, the video recording will be triggered
and the event will be recorded for 10 seconds (per file). If
the event lasts more than 10 seconds, the device will keep
recording up to 2 minutes.
- In this mode, the device is in standby mode until event
happens. This mode will consume more battery power.
•
Off:
No parking monitoring activated.
4. Press the
button to return recording screen.
Note:
1. When
Vibration Detection
or
Motion and
Collision Detection
is on,
the device records events by front camera only.
2. If battery in a fully charged condition, it can record about 20 minutes
video in Motion and Collision Detection mode. As the device is used,
the battery storage capacity will decrease gradually. This is a normal
phenomenon for the battery.
3. The video files taken in Parking Mode will be saved in “Parking Mode”
folder, which will not be overwritten by normal video files. However, if
the remaining memory capacity is not enough to save the last normal
video file, the oldest Parking Mode video will be deleted. Please always
make sure your backup Parking Mode video files.
4. Parking Mode folder can save about 40 parking mode files, when
parking mode files are full, loop recording will overwrite the oldest file.
34
DVR-5HD V2.2 09/17
