2.2.3 Mount Rear Camera to the Windshield
1. Remove the white backing paper on the double side sticker, attach
it onto the base of rear camera, then press
doubled side tape to ensure firmly stick.
2. Adjust rear camera as the picture shown:
please check base text is in the right
direction to ensure the recording screen
direction is in right direction before
installation.
3.
Connect the supplied 5m micro USB
cable to the front and rear cameras, then
connect the front camera to the power
supply then power on the front camera, enter preview screen and
confirm the field of view. Then clean the surface of the windshield
with alcohol to ensure that the adhesion surface is clean. Please
refer to Connecting to Power and Rear Camera (2.3), and Powering
the Device On / Off (2.5).
4. Remove the red paper on the double side
sticker.
5. Install rear camera onto the windshield,
press the bracket to ensure it is firmly
attached.
15
2.2.3 Mount Rear Camera to the Windshield
1.
Remove the white
backing
paper on the double
side sticker, stick it onto the base of rear
camera, then press doubled side
tape
to ensure firmly stick.
2.
Adjust rear camera as the picture
shown: please check base text is in
right
direction to ensure the
recording screen direction is in right direction before
installation.
3.
Connect
the supplied 5m micro USB cable to the front and
rear cameras, then connect the front camera to the power
supply
then power on
the front camera,
enter
preview screen
and confirm the field of view. Then clean the
surface of the
windshield with alcohol to ensure that the
adhesion
surface is clean. Please refer to
Connecting to
Power
and Rear Camera
(
2.3
), and
Powering the Device On / Off
(2.5).
4.
Remove the red paper on the double side
sticker.
5.
Install rear camera onto the
windshield, press the bracket
to
ensure
it is firmly attached.
15
2.2.3 Mount Rear Camera to the Windshield
1.
Remove the white
backing
paper on the double
side sticker, stick it onto the base of rear
camera, then press doubled side
tape
to ensure firmly stick.
2.
Adjust rear camera as the picture
shown: please check base text is in
right
direction to ensure the
recording screen direction is in right direction before
installation.
3.
Connect
the supplied 5m micro USB cable to the front and
rear cameras, then connect the front camera to the power
supply
then power on
the front camera,
enter
preview screen
and confirm the field of view. Then clean the
surface of the
windshield with alcohol to ensure that the
adhesion
surface is clean. Please refer to
Connecting to
Power
and Rear Camera
(
2.3
), and
Powering the Device On / Off
(2.5).
4.
Remove the red paper on the double side
sticker.
5.
Install rear camera onto the
windshield, press the bracket
to
ensure
it is firmly attached.
15
DVR-5HD V2.2 09/17
