background image

3 Using the Drive Recorder 
3.1 Automatic Record

If the drive recorder is connected to the vehicle power supply and 
power switch is in the On position once you start the car engine, 
the drive recorder will automatically power on and start recording. 
Recording will automatically stop when the engine is switched off.

Note:

 

1.  Some vehicle power supplies don’t turn on / off automatically with 

the car engine, if the device can not automatically power on/off 
with the car engine, please manually connect the power supply 
with the vehicle power, and then power on, or manually power 
off the device and then release the connector with the car power 
supply.

2.  The device can be configured to save a video file for every 1 or 3 

minutes of recording. Please refer to 

Record Interval

 (4.2). 

3.  All the videos and photos are saved in the memory card, if memory 

card is full, loop recording will be generally overwrite the oldest 
video file.

3.1.1 Resolution

 1.  

Front Camera: 2K HD@30 (1440P 30fps) / FHD@60 (1080P 
60fps) / FHD HDR (1080P HDR 30fps) / FHD@30 (1080P 30fps) / 
HD@120 (720P 120fps). 

2.  Rear camera resolution setting is FHD@30 (1080P 30fps), the 

resolution will not change by front camera resolution setting.

26

DVR-5HD V2.2 09/17

Summary of Contents for DVR-5HD



































































Reviews: