3.4.2 Parking Mode
To monitor the vehicle when it is parked, you can activate
Vibration
Detection
, or
Motion
and
Collision Detection.
Follow the steps
below to change the settings for Parking Mode:
1. Press the
button to enter the OSD menu.
2. Press the
/
button to select
Parking Mode
, and then press the
button to enter the function
menu.
3. Press the
/
button to
configure Parking Mode (Vibration
Detection / Motion and Collision
Detection / Off), and then press the
button to complete
setting.
•
Vibration Detection:
- If disconnected external power supply when the device is
powered on, the system alert message
“Wait 10 seconds
to enter Vibration Detection.”
This means the system
will power off and enter Vibration Detection automatically
in 10 seconds.
- Once Vibration Detection Mode is triggered, when the
device detects any collision, it will automatically power
on and start recording, the event will be recorded for 60
seconds (per file).
- In this mode, drive recorder is powered off until event
happens. This mode is more power saving.
•
Motion and Collision Detection:
- If disconnected external power supply when the device
is powered on, the system alert message
“Enter parking
34
3.4.3 Parking Mode
To monitor the vehicle when it is parked, you can activate
Vibration
Detection,
or
Motion and Collision Detection
.
Follow the steps below to change the settings for Parking Mode:
1. Press the
button to enter the OSD menu.
2. Press the
/
button to
select
Parking Mode
, and then
press the
button for
entering function menu.
3.
Press the
/
button to configure Parking Mode
(Vibration Detection / Motion and Collision Detection / Off), and
then press the
button to complete setting.
•
Vibration Detection:
-
If disconnected external power supply when the device
is powered on, the system alert message “
Wait 10
seconds to enter Vibration Detection.
” This means
the system will power off and enter Vibration Detection
automatically in 10 seconds.
-
Once Vibration Detection Mode is triggered, when the
device detects any collision, it will automatically power
on and start recording, the event will be recorded for 60
seconds (per file).
-
In this mode, drive recorder is powered off until event
happens. This mode is more power saving.
•
Motion and Collision Detection:
-
If disconnected external power supply when the device
is powered on, the system alert message “
Enter
33
DVR-5HD V2.2 09/17
