76 • EN
Return to contents
( S6800 & S8100 V1.0 EN 3/21 )
5.18.6 Settings.
To enter the setting page press the top section of the DVB-T screen and then press the setting button.
1
2
3
4
5
6
7
8
9
Information
This screen displays the hardware and software versions of DVB-T
1
2
3
4
5
6
7
8
9
Software revison
1
2
3
4
5
6
7
8
9
Hardware details
1
2
3
4
5
6
7
8
9
Software revison date.
To exit the information screen press the return button
5.18.7 Warnings and notifications
No Program or No Signal
If the screen displays ‘No Program’ then the DVB-T is not receiving any TV station signal, try retuning the DVB-T stations - refer to
section 5.18.1
If ‘No Signal’ is displayed then the DVB-T is not receiving a signal. Try realigning the antenna and/or retuning the DVB-T - refer to
section 5.18.1
It is unsafe and illegal to watch TV whilst the vehicle is in motion , if the DVB-T function is open and the vehicle speed exceeds
10 km/h then the following message will be displayed:
For safety reasons this function is disabled when the vehicle speed exceeds 10Km/h
Close the DVB-T function by pressing the X in the top right of the screen.
DVB-T2 function does not support headphones, pls remove headphone jack to enable main speaker.
Remove any headphones or external speaker which is connected to the S8100.
Warning! Low battery, connect the external power source to prevent shut down.
Connect the vehicle power cable.
Reset
To reset the DVB-T function to factory settings:
1: Press Reset
2: Press the ‘Tick’ to confirm reset
Once the reset process has completed the DVB-T
function will close .
1
2
3
4
5
6
7
8
9
