21 • EN
Return to contents
( S6800 & S8100 V1.0 EN 3/21 )
Setting up vehicle parameters
For Ventura to calculate a route suitable for your vehicle it needs to know certain information about the vehicle itself such as its
height, weight and width. It is possible to save the settings of 10 different vehicles. Follow these instructions to enter your vehicles
details.
Press the centre of the screen to access the menu, press ‘Configure’ and then press the ‘Caravan/Motorhome’ icon.
Name: Enter the name here.
Height: Enter the height of the vehicle here.
NOTE: Maximum height including any protrusions
(roof box, TV antenna etc)
Length: Enter the length of the vehicle here.
Weight: Enter the weight of the vehicle here.
Width: Enter the width of the vehicle here.
NOTE: Caravan - the maximum height, width and length must include the
dimensions of the vehicle towing the caravan, whichever is the greatest (e.g. the car wing mirrors may be wider than the caravan
being towed). The combined weight of the caravan and the vehicle must also be used.
Weight per axle: Enter the weight per axle of
the vehicle here
Vehicle type:
●
●
Fixed Axle: Standard setting for fixed axle vehicles (such as a Motorhome).
●
●
Trailer: Select this if you are towing a caravan. Specific traffic rules exist for vehicles towing caravans. For example, there are roads
that are forbidden for towing vehicles. These will be avoided.
Setting up vehicle parameters
To enter the emission settings of your vehicle in car mode press the
and enter the details as shown in the Environmental
setting section page: 22.
