15 • EN
Return to contents
( S6800 & S8100 V1.0 EN 3/21 )
Charging the internal battery
Although Snooper can be charged using the vehicle charger in your vehicle, an
alternative method of charging is either via a USB socket of a PC, or a USB Mains
charger (output of 5v 1000mA) - not supplied.
Connect the Device to the PC or external power, the unit will switch On
automatically. To charge the battery, switch the unit off by holding the power
button for 7-10 seconds. The battery icon will appear on the screen to indicate
that the unit is on charge.
Note: The new battery’s full performance is only achieved after two or three
complete charges and discharges. The battery icon indicates that the battery
is charging ONLY and does not indicate the level of charge currently within
the battery. When fully charged you will see an icon similar to the picture on
the right.
Powering Snooper using the built-in battery
Once Snooper is fully charged, it is ready for use. Press and hold the power switch on the top of the unit for 2 seconds to switch on
the device.
Note: the battery is designed to be a back up ONLY and Snooper recommends that the the navigation device is powered from
the vehicle charger when in use.
On
Press and hold for 2 seconds
Off
Press and hold for 7 - 10 seconds
Plug the
charger cable into
the USB socket on the
side of the Snooper
