Snom d745, User Manual

Page: 62 / 102

62
D745 User Manual Using the Phone
C
all forwarding
The phone can be set to forward incoming calls, either always or under certain conditions. The
settings can be done on the phone and on the web interface. For further information on using the web
interface for these settings, see "Call forwarding" on page 79.
NOTE:
Call forwarding is set for each configured identity separately. When the setting
is done on the phone, it applies to the identity selected as outgoing identity.
Forward All:
Forwarding all incoming calls to the number of the phone, extension, or mailbox
specified as this function’s target.
Forwarding all calls is off All incoming calls are forwarded
In the default setting, one of the symbols / is available in the function key line and can be
used to turn forwarding of all calls on and off, respectively, by pressing the function key underneath
the symbol, but you can also map the function onto another function key or use the settings menu as
shown in the table below.
Forward when
Busy: Forwarding calls ringing while the phone is busy to the number of the phone,
extension, or mailbox specified as this function’s target.
Forward after
Timeout: When a call starts ringing, the phone will wait for the number of seconds
specified in the setting "Call forwarding time". If the call is not accepted by the end of this time period,
it is forwarded to the number of the phone, extension, or mailbox specified as this function’s target.
Making/changing the settings on the phone and turning on call forwarding
Forward all Forward when busy Forward after timeout
Press
Press
2 Call Features 2 Call Features 2 Call Features
Press
1 Call Forwarding 1 Call Forwarding 1 Call Forwarding
Press
1 Forward All 2 Forward when Busy 3 Forward after Timeout
Press
2 Target when forwarding
2 Target when forwarding
2 Target when forwarding
Type phone number phone number phone number
Press
Press
3 Call Forwarding time
Type number of seconds
Press
Press
1 Activate 1 Activate 1 Activate