13
D745 User Manual
Setting up the Phone
• The second RJ45 connector, labeled “PC”, is for daisy-chaining further Ethernet devices without
the need for a second Ethernet connection line.
C
onnecting a headset
You can use wired as well as wireless headsets with the phone.
• Wired headsets
If you want to use a wired headset, connect it to the RJ audio jack labeled "
".
Note:
If both a wired and a wireless headset are connected to the phone, incoming calls
will go to the wireless headset.
• Wireless headsets
◦
Connecting the base station of your headset via the Snom EHS Adapter.
Connect the proprietary Snom connector of the 7xx adapter cable to the Snom port
on
the back of the phone, as shown in Fig. 1-3, below.
Do not plug it in upside down
(Fig. 4); this
will damage the EHS Advanced.
Note:
The footstand must be removed from the phone to gain access to the
connector (see "Attaching and detaching the footstand" on page 10). After
you have inserted the plug, make sure that the cable is lying flat against the
bottomshell of the phone (Fig. 3) while you are attaching the footstand to the
phone. Twisting or curling up the cable may result in damaging the cable and
the wires inside it.
Please refer to the Quick Start Guide of the snom EHS Advanced and the manual of your
wireless headset for further information on how to connect the snom EHS Advanced and the
headset.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
◦
Connecting the headset to the phone via a Bluetooth-compatible adapter.
Insert the adapter into the USB port of the phone. See also the Quick Start Guides of the Snom
USB BT and the Snom HS BT or the manual of the third-party headset.
Summary of Contents for d745
Page 1: ...IP Phone D745 User Manual...
