background image

101

modify or distribute the Program or its derivative works. These actions 
are prohibited by law if you do not accept this License. Therefore, 
by modifying or distributing the Program (or any work based on the 
Program), you indicate your acceptance of this License to do so, and 
all its terms and conditions for copying, distributing or modifying the 
Program or works based on it.

6. 

Each time you redistribute the Program (or any work 

based on the Program), the recipient automatically receives a license 
from the original licensor to copy, distribute or modify the Program 
subject to these terms and conditions. You may not impose any further 
restrictions on the recipients'exercise of the rights granted herein. You 
are not responsible for enforcing compliance by third parties to this 
License.

7. 

If, as a consequence of a court judgment or allegation 

of patent infringement or for any other reason (not limited to patent 
issues), conditions are imposed on you (whether by court order, 
agreement or otherwise) that contradict the conditions of this License, 
they do not excuse you from the conditions of this License.  If you cannot 
distribute so as to satisfy simultaneously your obligations under this 
License and any other pertinent obligations, then as a consequence you 
may not distribute the Program at all.  For example, if a patent license 
would not permit royalty-free redistribution of the Program by all those 
who receive copies directly or indirectly through you, then the only way 
you could satisfy both it and this License would be to refrain entirely 
from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any 
particular circumstance, the balance of the section is intended to apply 
and the section as a whole is intended to apply in other circumstances.

    It is not the purpose of this section to induce you to infringe any 
patents or other property right claims or to contest validity of any such 
claims; this section has the sole purpose of protecting the integrity of 
the free software distribution system, which is implemented by public 
license practices.  Many people have made generous contributions 
to the wide range of software distributed through that system in 
reliance on consistent application of that system; it is up to the 
author/donor to decide if he or she is willing to distribute software 
through any other system and a licensee cannot impose that choice. 
This section is intended to make thoroughly clear what is believed to be 
a consequence of the rest of this License.                                                                                             

8. 

If the distribution and/or use of the Program is restricted 

in certain countries either by patents or by copyrighted interfaces, the 
original copyright holder who places the Program under this License 
may add an explicit geographical distribution limitation excluding those 
countries, so that distribution is permitted only in or among countries 
not thus excluded.  In such case, this License incorporates the limitation 
as if written in the body of this License.

9. 

The Free Software Foundation may publish revised and/

or new versions of the General Public License from time to time.  
Such new versions will be similar in spirit to the present version, 
but may differ in detail to address new problems or concerns. 
Each version is given a distinguishing version number.  If the Program 
specifies a version number of this License which applies to it and 
„any later version“, you have the option of following the terms and 
conditions either of that version or of any later version published by the 
Free Software Foundation.  If the Program does not specify a version 
number of this License, you may choose any version ever published by 
the Free Software Foundation.

10.  If you wish to incorporate parts of the Program into other free 
programs whose distribution conditions are different, write to the 
author to ask for permission.  For software which is copyrighted by the 
Free Software Foundation, write to the Free Software Foundation; we 
sometimes make exceptions for this.  Our decision will be guided by 
the two goals of preserving the free status of all derivatives of our free 
software and of promoting the sharing and reuse of software generally.

the Program itself is interactive but does not normally print such an 
announcement, your work based on the Program is not required to 
print an announcement.)

These requirements apply to the modified work as a whole.  If 
identifiable sections of that work are not derived from the Program, 
and can be reasonably considered independent and separate works 
in themselves, then this License, and its terms, do not apply to those 
sections when you distribute them as separate works. But when you 
distribute the same sections as part of a whole which is a work based 
on the Program, the distribution of the whole must be on the terms 
of this License, whose permissions for other licensees extend to the 
entire whole, and thus to each and every part regardless of who wrote 
it. 
 
Thus, it is not the intent of this section to claim rights or contest your 
rights to work written entirely by you; rather, the intent is to exercise 
the right to control the distribution of derivative or collective works 
based on the Program.  In addition, mere aggregation of another work 
not based on the Program with the Program (or with a work based on 
the Program) on a volume of a storage or distribution medium does 
not bring the other work under the scope of this License.

3

You may copy and distribute the Program (or a work based 

on it, under Section 2) in object code or executable form under the 
terms of Sections 1 and 2 above provided that you also do one of the 

following:

a)

 

Accompany it with the complete corresponding machine-

readable source code, which must be distributed under the terms of 
Sections 1 and 2 above on a medium customarily used for software 
interchange; or,

b) 

Accompany it with a written offer, valid for at least three 

years, to give any third party, for a charge no more than your cost 
of physically performing source distribution, a complete machine-
readable copy of the corresponding source code, to be distributed 
under the terms of Sections 1 and 2 above on a medium customarily 
used for software interchange; or,

c) 

Accompany it with the information you received as to the 

offer to distribute corresponding source code.  (This alternative is 
allowed only for noncommercial distribution and only if you received 
the program in object code or executable form with such an offer, in 
accord with Subsection b above.)

The source code for a work means the preferred form of the work for 
making modifications to it.  For an executable work, complete source 
code means all the source code for all modules it contains, plus any 
associated interface definition files, plus the scripts used to control 
compilation and installation of the executable.  However, as a special 
exception, the source code distributed need not include anything that 
is normally distributed (in either source or binary form) with the major 
components (compiler, kernel, and so on) of the operating system on 
which the executable runs, unless that component itself accompanies 
the executable.

If distribution of executable or object code is made by offering access 
to copy from a designated place, then offering equivalent access to 
copy the source code from the same place counts as distribution of the 
source code, even though third parties are not compelled to copy the 
source along with the object code.

4. 

You may not copy, modify, sublicense, or distribute the 

Program except as expressly provided under this License.  Any attempt 
otherwise to copy, modify, sublicense or distribute the Program is 
void, and will automatically terminate your rights under this License. 
However, parties who have received copies, or rights, from you under 
this License will not have their licenses terminated so long as such 
parties remain in full compliance.

5. 

You are not required to accept this License, since you 

have not signed it.  However, nothing else grants you permission to 

Appendix 5

Summary of Contents for d745







































































































Reviews: