54
D745 User Manual
Using the Phone
"Deny" list of the phone's directory. Future calls from this number will not ring on the phone;
the caller hears the busy signal. For more information on the "Deny" list and how to remove
entries from it, see "Contact Types" on page 41.
A
ctive calls
Hold
One call on hold
Press
to put the ongoing call on hold. Held calls are indicated threefold:
◦
By the text on the display.
◦
By the slowly blinking line key.
◦
By the slowly blinking call indication LED.
You can now:
◦
transfer the held call blindly or with prior announcement - see
"Transferring calls" on page 56.
◦
receive and make calls and put other calls on hold.
Pick up the held call by pressing its line key or by pressing
again. If the other party hangs up
while on hold, the call is terminated on your phone as well and the LED indicators are turned off.
Holding multiple calls
If you are in a call with one party and have one or more calls on hold or if there is more than one
call on hold, the symbol
is available in the function key line. You can switch back and forth
between the active call and any call on hold. Up to 12 simultaneous calls are possible, if supported by
the PBX.
• In Fig. 1 and 2 the phone is in one active call with a second call on hold. Press the function key
underneath
/
to show the call not currently on screen.
• In Fig. 3, 4, and 5 there is one active call, and two calls are on hold. Press the function key
underneath
to show the calls not currently on screen, one after the other.
Fig. 1
Fig. 2
Active call indicated by the symbol , followed
by the phone number of the other party (Fig. 1).
Held call indicated by the symbol , followed
by the phone number of the party on hold (Fig.
2, 3, 4, and 5).
Summary of Contents for d745
Page 1: ...IP Phone D745 User Manual...
