MV-32/64 Multiviewer
www.snellgroup.com
Hardware Configuration
Issue 1 Rev 11
Page 135
© 2014 Snell Limited
Fig 93. shows the internal layout with a double rear fitted.
Fig 94. shows the internal layout with a single rear module fitted.
When double width rear connector modules are used, the input capacity of the MV-32/MV-64
multiviewer is reduced. For example, if the MV-32/MV-64 multiviewer were to be configured
with looping inputs, dual width rear modules would be required (MV-RM10). In this case, the
total video input capacity of the frame is reduced from a possible 64 to 32 inputs. Eight video
input cards and eight video loop cards would be needed for this configuration to work, which
would fully populate the 16 usable video card slots in the frame.
Fig 93. Internal Layout with a Double Rear Fitted.
Fig 94. Internal Layout with a Double Rear Fitted.
