MV-32/64 Multiviewer
www.snellgroup.com
Connection to Other Equipment
Issue 1 Rev 11
Page 96
© 2014 Snell Limited
8.
Select the
Boards
tab to check the Sources (inputs) to the multiviewer. For example
to make sure they are SDi rather than DVi etc.
9.
Click on the
OK
button to save the changes.
10. Once you have a multiviewer on-screen layout setup, double click the screen to be
edited. The
Edit Objects
dialog for that screen is displayed.
11. From this screen select the
Properties
tab and then select the
Tally
tab
Settings should be as shown in Fig 83.
Fig 82. Module Properties - Boards Tab
Fig 83. Edit Object - Properties Tab - Tally Tab
