Snell MV-32 User Manual Download

Page: 33 / 136

MV-32/64 Multiviewer

www.snellgroup.com

Operation

Issue 1 Rev 11

Page 33

4.2.2 Navigating the User Interface

Settings for multiviewer objects can be accessed from the Module, Layout, Group and Object
menus, or by using the buttons on the toolbar.

4.3 Module Menu

The Module Menu allows a module's global settings to be configured.

Fig 17. Toolbar with Tooltips.

Note:

Some functions are only available from the toolbar.

Fig 18. Module Menu.

Auto update

Automatically update tile layout to the display output and preview
every time it is changed in the edit workspace.

Update Layout

Transfer edit workspace layout to display output and preview.

Get Layout

Transfer the current display layout to the edit workspace.

Setup Module

Opens the Module Properties dialog of the currently selected tile
object, see section 4.11.

Setup selected

video source

Opens the Source Properties dialog of the currently selected tile
object, see section 4.12.

Note

: The error message, 'Selected object has no source', will appear

if the currently selected object is not an audio or video object.

Setup external

audio source

Opens the External Audio Source Properties dialog, see section 4.15.

Table 9.

Module Menu Items.

Summary of Contents for MV-32









































































































































Search results

Summary of Contents for MV-32

Reviews:

Related manuals for MV-32

Brands by name

Popular brands

Snell MV-32, User Manual

Search results

Summary of Contents for MV-32

Reviews:

Related manuals for MV-32

Brands by name

Popular brands