IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 97
© 2016 SAM
5.19 Setup
The Setup screen displays basic information about the unit such as the serial number and
software version.
•
Software Version:
The currently installed software version.
•
Rear ID:
The rear panel ID number.
•
Serial Number:
The module’s serial number.
•
Build:
The factory build number. This number identifies all parameters of the module.
•
Number of Channels:
The number of processing channels.
•
Frame Slot:
The module’s current frame slot.
•
Fan:
Fan status.
•
Licensed Options:
(For example, IQOPTM-2NR.) Shows which licensed options are
installed. If a licensed option has not been purchased, its status shows “Not Fitted”.
For more information on licensed options, see “Software Options” on page 11.
5.19.1 Factory Defaults
The Factory Defaults button resets the module settings to their factory defaults, and clears all
user memories.
5.19.2 Default Settings
The Default Settings button resets the module settings to their factory defaults, leaving user
memories intact.
5.19.3 Restart
The Restart button reboots the module, simulating a power-up/power-down cycle.
