IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 37
© 2016 SAM
5
Operation Using the RollCall Control Panel
5.1 Information Window
The Information Window is displayed at the top of each screen. When an option is selected in
the Information Window, the Unit Status area shows corresponding information about the
status of the module.
5.1.1 Video Input Status
When Video Input Status
is selected in the Information Window, the Unit Status area shows
input status information for processing channels 1 and 2.
5.1.2 Video Output Status
When
Video Output
is selected in the Information Window, the Unit Status area shows output
status information for processing channels 1 and 2.
Note:
The screens shown in this section are for guidance and reference only, and may be slightly
different to those on your unit.
Note:
Processing channel 2 information is only applicable to the IQUDC31 and IQUDC33.
Information
Status
Description
Inp: Ch1:
Inp: Ch2:
1080 50p-A
(example)
Shows the current detected input video standard. For
a list of supported standards, see page 18.
Loss
No input signal received.
SDI 1
Input source is SDI 1.
SDI 2
Input source is SDI 2.
CVBS
Input source is CVBS.
SFP 1
Input source is SFP 1.
SFP 2
Input source is SFP 2.
Information
Status
Description
Out: Ch1:
Out: Ch2:
625 50i
(example)
Shows the current output video standard. For a list of
supported standards, see page 18.
Loss
No output signal.
