IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 92
© 2016 SAM
5.18 Logging
Logging makes information about various parameters available to a logging device connected
to the RollCall network.
Each logging screen has three columns:
•
Log Enable:
Use the check boxes to select the parameters for which log information
should be collected.
•
Log Field:
Shows the name of the logging field.
•
Log Value:
Shows the current log value.
5.18.1 Misc. Logging
The Misc-Logging screen shows the current log information for the unit’s basic parameters.
Log Field
Description
SN=
The module’s unique serial number. Note: this cannot be
deselected.
UPTIME=
Shows the time since the last restart (format ddd:hh:mm:ss).
POWER USAGE=
The power rating for the module. Note: this is not a live power
reading, but a maximum power rating.
BUILD=
The factory build number. This number identifies all
parameters of the module.
