IQUDC30/IQUDC31/IQUDC32/IQUDC33
Introduction
Issue 1 Rev 4
Page 9
© 2016 SAM
1.3 Features
•
Up, down, and cross conversion with frame synchronization.
•
Native RollCall control.
•
Flexible video and audio i/o configurations.
•
16-channel embedded audio processing.
•
Dolby-E guard-band alignment.
•
Fiber i/o options.
Key video and metadata processing features:
•
Standards: 525i, 625i, 720p23/24/25/29/50/59, 1080i50/59, 1080p23/24/25/29,
1080psf23/24/25/29, 1080p50/59 (A/B).
•
L23, video index, and SMPTE 2016 (AFD) signaling.
•
Closed caption CEA608 <> CEA708.
•
Timecode conversions.
•
WST/RDD-08 and WST/SMPTE2031 conversion.
•
Insertion of SMPTE ST352 payload identification for psf standards.
•
Proc amp, gamma, legalizer.
•
Full range of enhancement, horizontal and vertical.
•
Conversion aperture control.
•
Noise reduction (option).
•
Sidebar key (option).
•
Logo insertion (option).
•
Linear frame rate conversion (option).
•
2 GPI/O terminals via 3-pin screw terminal connector.
Key audio features:
•
Embedded Audio 16-channel embedded audio processing.
•
PCM audio processing includes channel level routing, gain and delay compensation.
•
Non-PCM processing features pair level routing and delay compensation. Dolby-E
data is passed with a delay to match the video and with co-timed audio frame drop or
repeat.
•
Eight AES audio ports, individually assignable as inputs or outputs.
•
AES audio inputs, individually available to any or all processing channels.
•
AES audio outputs (48 kHz), separately assignable to any processing channel.
•
AES input is auto-detected as PCM (32 to 96 kHz) or non-PCM (48 kHz locked to
relevant video input).
Note:
Low frame rate support (i.e. 23, 24, 25, 29 Hz) is not available in modules which were
upgraded to V5.2.7 or above after installation. Only new builds of modules at version 5.2.7
and above will support low frame rate signals.
Note:
AES I/O is only applicable to the IQUDC32 and IQUDC33.
