IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 68
© 2016 SAM
5.7 Audio Routing-Ch1 and Ch2
The Audio Routing-Ch1 and Ch2 screens are the first stage of the channel-based audio
routing, with eight process pairs available for selection. The matrix of radio buttons enable
you to route any available audio input pair to any process pair.
5.7.1 Input Pairs
All audio input pairs available for routing on the process channel are listed here along with
their current input status. The input pairs displayed are dependent on the product
configuration and licensing options. Each input pair corresponds to a row of radio buttons in
the routing matrix.
5.7.1.1
Source
Source lists the input sources available for routing.
•
Embedded 1 –8: If the selected video input to the processing channel is capable of
carrying embedded audio, the de-embedded audio pairs will be available here. Up to
eight audio pairs are available for each processing channel.
•
AES 1–8: If the AES pairs are configured as inputs on the Audio I/O AES page
screen, the input AES audio pairs will be available here. Up to eight AES audio pairs
are available for each processing channel.
Note:
The Audio Routing-Ch2 screen is only applicable to the IQUDC31 and IQUDC33.
