Smiths Medical Medfusion 3000 Series, Technical & Service Manual

Page: 106 / 184

Calibration & Adjustment
100
40-5648-51B
Calibrate force sensor
1. From the
Calibration
menu, choose
Cal Force
Sensor .
1. CAL SIZE AND POSITION 5. CAL SYRINGE SIZE SENSOR
2. CAL FORCE SENSOR
6. ADJUST CONTRAST
3. CAL PRESSURE SENSOR 7. VIEW CALIBRATION DATA
4. CAL PLUNGER POSITION 8. SAVE CHANGES AND EXIT
PRESS THE NUMBER TO SELECT THE MODE
PRESS THE NUMBER TO SELECT
1 CAL SIZE AND POSITION 5 ADJUST CONTRAST
2 CAL FORCE SENSOR 6 VIEW CALIBRATION DATA
3 CAL PLUNGER POSITION 7 SAVE CHANGES AND EXIT
4 CAL SYRINGE SIZE SENSOR
2. Ensure nothing is loaded in the plunger head, press
Continue and wait until force sensor zero is fin -
ished.
OFFSET DATA: 0 COUNTS
MAX VALUE DATA: 50 COUNTS
FORCE DATA:
MIN VALUE DATA: 34 COUNTS
SETUP LOW STANDARD
-
PRESS CONTINUE WHEN READY
CONTINUE
OFFSET
DATA:
0
COUNTS
MAX VALUE
DATA:
50
COUNTS
FORCE
DATA:
MIN VALUE
DATA:
34
COUNTS
SETUP LOW STANDARD
-
PRESS
<
CONTINUE
>
WHEN READY
CONTINUE
3. The pump then auto-zeroes the force sensor’s offset
(this takes about 40 seconds). [
Do not use arrow
keys
.]
OFFSET
DATA:
138
COUNTS
MAX VALUE
DATA:
50
COUNTS
FORCE
DATA:
44
COUNTS
MIN VALUE
DATA:
34
COUNTS
ADJUST THE FORCE OFFSET
-
PRESS ENTER TO CONTINUE
ENTER
↓ ↑
OFFSET
DATA:
138
COUNTS
MAX VALUE
DATA:
50
COUNTS
FORCE
DATA:
44
COUNTS
MIN VALUE
DATA:
34
COUNTS
ADJUST THE FORCE OFFSET
-
PRESS
<
ENTER
>
TO CONTINUE
ENTER
↓ ↑
4. Press
Enter
when zeroing is complete.