SMC Networks PF3W7 Series, Operation Manual

Page: 31 / 93

-30-
No.PF
※※
-OMM0005-N
■
Default settings
Item Default setting
Page
[F 1]/[ oUt1]
[ oU1] Output mode (OUT1) [ HYS] Hysteresis mode Page 32
[ 1ot] Switch operation (OUT1) [ 1_P] Normal output Page 32
[ P_1] Set value (OUT1)
50% of maximum rated flow
[ 2.00] 2.00 L/min (4 L type)
[ 8.0] 8.0 L/min (16 L type)
[ 20.0] 20.0 L/min (40 L type)
[ 50] 50 L/min (100 L type)
[ 126] 126 L/min (250 L type)
Page 33
[ H_1] Hysteresis (OUT1)
5% of maximum rated flow
[ 0.20] 0.20 L/min (4 L type)
[ 0.8] 0.8 L/min (16 L type)
[ 2.0] 2.0 L/min (40 L type)
[ 5] 5 L/min (100 L type)
[ 12] 12 L/min (250 L type)
[ CoL] Display colour (OUT1)
[ SoG] ON: Green, OFF: Red
Page 36
[F 2]/[ oUt2]
[ oU2] Output mode (OUT2) [ HYS] Hysteresis mode (Flow) Page 40
[ 2ot] Switch operation (OUT2) [ 2_P] Normal output Page 40
[ P_2] Set value (OUT2)
50% of maximum rated flow
[ 2.00] 2.00 L/min (4 L type)
[ 8.0] 8.0 L/min (16 L type)
[ 20.0] 20.0 L/min (40 L type)
[ 50] 50 L/min (100 L type)
[ 126] 126 L/min (250 L type)
Page 41
[ H_2] Hysteresis (OUT2)
5% of maximum rated flow
[ 0.20] 0.20 L/min (4 L type)
[ 0.8] 0.8 L/min (16 L type)
[ 2.0] 2.0 L/min (40 L type)
[ 5] 5 L/min (100 L type)
[ 12] 12 L/min (250 L type)
[F 3]/[ RES] [ rES] Response time setting
[ 1.00] 1 second
Page 45
[F10]/[ SUb] [ SUb] Selection of sub screen
[ oUt] Display of set value (OUT1)
(Without temperature sensor)
Page 46
[ tEMP] Display of fluid temperature
(With temperature sensor)
[F20]/[ iNP] [ inP] Setting of external input [REACUM] Accumulated flow external reset Page 50
[F22]/[ AnA]
[ AnA] Setting of analogue output
[ FLoW] Analogue output of flow
(Without temperature sensor)
Page 51
[ tEMP] Analogue output of temperature
(With temperature sensor)
[ FrE] Free range [ oFF] Free range: OFF
[F30]/[ SAVE] [SAvE] Storing of accumulated flow [ oFF] OFF [not held] Page 53
[F80]/[ dSP] [ dSP] Setting of power saving mode [ oN] No setting [display is turned on] Page 54
[F81]/[ PiN] [ Pin] Setting of security code [ oFF] OFF Page 55
[F82]/[ LiNE] [ LinE] Input of line name [ * * * * * * ] No name ****** Page 56
[F90]/[ ALL] [ ALL] Setting of all functions [ oFF] OFF Page 57
[F98]/[ tESt] [ tESt] Output check [ NoRMAL] OFF Page 58
[F99]/[ iNi] [ ini] Reset to the default settings [ oFF] OFF Page 59