![background image](http://html1.mh-extra.com/html/smc-networks/pf3w7-series/pf3w7-series_operation-manual_1300863027.webp)
-26-
No.PF
※※
-OMM0005-N
Flow Setting
Measurement mode
The mode in which the flow is detected and displayed, and the switch function is operating.
This is the basic operating mode; other modes should be selected for set-point and other function setting
changes.
: The outputs will continue to operate during setting.
: If a button operation is not performed for 30 seconds during the setting, the display will flash (This is to prevent the setting from
remaining incomplete if, for instance, an operator were to leave during setting).
: 3 step setting mode and Function selection mode are reflected on each other.
Display of sub screen
In measurement mode, the display of the sub screen can be temporarily changed by pressing the
or
buttons.
After 30 seconds, it will automatically reset to the display selected in [F10]. (Refer to page
(Example shown is for 4 L/min type)
: The set values and accumulated output of OUT2 cannot be displayed.
Summary of Contents for PF3W7 Series
