-28-
No.PF
※※
-OMM0005-N
<Operation of the set value change >
(3 step setting mode)
1. Press the
button in measurement mode to display set values.
2. [P_1] or [n_1] and the set value are displayed alternately.
3. Press the
or
button to change the set value.
The
button is to increase and the
button is to decrease the set value.
Press the
button once to increase by one digit, or press and hold to continuously increase.
Press the
button once to decrease by one digit, or press and hold to continuously decrease.
4. Press the
button to finish the setting.
: For models with switch outputs for both OUT1 and OUT2, [P_2] or [n_2] will be displayed too. Set as above.
: For models with the temperature sensor attached, [ tn] or [ tp] will be displayed too. Set as above.
: For input of hysteresis, perform the settings referring to [F 1] Setting of OUT1 (page
) and [F 2] Setting of OUT2 (page
).
:
When a mode other than hysteresis mode is selected, “Set value” of page
is displayed.
: Note that the set value and hysteresis are limited by each other.
: For more detailed settings, set each function in function selection mode (page
Summary of Contents for PF3W7 Series
