SMC Networks PF3W7 Series, Operation Manual

Page: 43 / 93

-42-
No.PF
※※
-OMM0005-N
c. When accumulated output mode is selected.
The setting of Add/dEC is linked to the setting of OUT1, and can not be selected. (Refer to page 34 .)
When accumulated increment is selected When accumulated decrement is selected
at the OUT1 setting. at the OUT1 setting.
(When the reversed output is
selected, the main screen
displays [n2AH].) (When the reversed output is
selected, the main screen
displays [n2dH].)
Setting of the first
3 digits
When the button is
pressed for 1 second
or longer, the flashing
will stop.
Press the
button
again.
Setting of the latter
6 digits
When the button is
pressed for 1 second
or longer, the flashing
will stop.
The sub screen displays the
value, and the leftmost digit of
the set value will start
flashing.
(The required accumulated
value should be input one
digit at a time.)
Press the
and buttons
to change the value.
Press the
button to move
onto the input to the next right
digit.
Pressing the
button again
will select the next digit to the
right.
After the input of the first 3
digits is complete, press the
button for 1 second or
longer. The flashing will stop.
Press the
button again to
confirm the values of the first
3 digits and move onto the
input of the next 6 digits.
After the input to the next 6
digits is complete, press the
button for 1 second or
longer to confirm.
Press the button to confirm. Return to the function selection mode.
4. Completed
[F 2] Setting of OUT2 is completed.