SMC Networks PF3W7 Series, Operation Manual

Page: 47 / 93

-46-
No.PF
※※
-OMM0005-N
■
[F10] Selection of sub screen
The display shown on the sub screen during measurement mode can be set.

Switch point value display: Displays the set value for switch point of OUT1.
(The set value for the switch point of OUT2 can not be displayed.)

Accumulated value display: Displays the accumulated value of OUT1.
(The accumulated value of OUT2 can not be displayed.)

Peak value display: Displays the maximum measured flow rate value since the last reset.

Bottom value display: Displays the minimum measured flow rate value since the last reset.

Display of line name: Displays the name of the line.

Display of fluid temperature: Displays the temperature of fluid. (With the temperature sensor)

Temperature bottom display: The bottom value of fluid temperature displayed.
(With the temperature sensor)

Temperature peak display: The peak value of fluid temperature displayed. (With the temperature sensor)

OFF: Displays nothing.
<Operation>
Press the or button in function selection mode to display [F10] on the main screen.
The sub screen displays [SUb] and the current set value alternately.
Press the button.
The sub screen displays the current set value.
Sub screen
Press the or button to select the display.
Press the button to confirm. Return to the function selection mode.
[F10] Selection of sub screen is completed.