SMC Networks ISE80(H), Operation Manual

Page: 37 / 61

-36-
PS##-OMM0003-A
■ [F 9] Setting of power saving mode
Power saving mode is selectable.
When the Pressure switch is left for 30 seconds without any operation, it is shifted to power saving mode.
(The decimal point and indication light (only with the switch output ON) flash during the operation.)
<Operation>
Press the or button in function selection mode to display [F 9].
Press the button.
Move on to setting of power saving mode.
Press the button to set.
Return to function selection mode.
Setting of [F 9] power saving mode completed
In power saving mode, a key operation returns to normal display, and if there is no key operation for
30 seconds, the display enters power saving mode. (only in measurement mode).
∗
: The indicator light also flashes with the Pressure switch, but it is not simultaneous to output.
Setting of power saving mode
[ECo] and set value are displayed in turn.
Press the
or button to select power saving mode.
On the display in power saving mode, only decimal points and indicator
lights flash as shown in the right figure (only with the Pressure switch on).