SMC Networks ISE80(H), Operation Manual

Page: 19 / 61

-18-
PS##-OMM0003-A
■ Piping
○ Mounting by screw type piping
•
Connect suitable piping with mating port.
•
In order to connect the hexagon socket head plug or fitting on the pressure port, hold the hexagon part of
the pressure port and fix.
Apply a tightening torque of 13.6 Nm or less.
○ Tube attachment
•
When this Pressure switch is used in a place where water and dust splash on, insert a tube in the
air-relieving port, and bring piping of the opposite side up to the safe position to keep it from water and
dust. (See the figure below.)
<Rear piping>
<Bottom piping>
∗
: The tube should be inserted to the end of the air-relieving port.
∗
: SMC TU0425 (polyurethane, O.D
φ
4, I.D
φ
2.5) suits to the Pressure switch.