IDX-OM-V020
Chapter
2
Name and Function of Parts
IDFA60/70/80/90 Series
2.1
Name and Function of Parts
2-1
Chapter 2 Name and Function of Parts
2.1 Name and Function of Parts
Terminal block
- Remove the front panel of the product. Connect
the power supply cable through the strain relief.
(to be connected to the user's equipment)
Refer to 3-5 for details for electric wiring.
Switch with lamp
[ON/OFF switch]
The lamp is continuously on
during normal operation.
Evaporation thermometer
Indicates the temperature of
refrigerant of low-pressure side.
During normal operation, it
indicates in the green zone.
Thermal relay
(Thermal relay appears when the
front panel is removed) Refer to the
page 6-4 for resetting.
Right ventilation grille
(air discharge opening)
Hot air is exhausted from the
fan motor. Do not block the grill.
Auto drain
Check the auto drain is working
properly at least once a day.
High pressure switch
(High pressure switch appears when
the front panel is removed) Refer to
the page 6-4 for resetting.
Rubber grommet
Signal cable entry
Strain relief
Power supply cable entry
（
）
L
N PE
Compressed air inlet (IN)
Compressed air outlet (OUT)
Ball valve
Summary of Contents for IDFA60-23-A
Page 36: ...IDX OM V020 Chapter 7 Documents 7 5 Air Refrigerant Circuit IDFA60 70 80 90 Series 7 6...
Page 52: ......
Page 53: ......
