![background image](http://html1.mh-extra.com/html/smc-networks/idfa60-23-a/idfa60-23-a_manual_1299717047.webp)
IDX-OM-V020
Chapter
12
Option T
IDFA60/70/80/90 Series
12.4
Connect the power cable and signal cable
12-3
12.4 Connect the power cable and signal cable
Connect the power cable and signal cable according to the procedure below.
1) Remove the front panel.
2) Insert the power cable to the power cable entry and connect to the terminal block.
3) Insert the signal cable to the signal cable entry and connect to the terminal block.
M3.5
Screw tightening torque: 1.0 to 1.3N
・
m
M4.0
Screw tightening torque: 1.4 to 2.0N
・
m
Do not touch any equipment other than the terminal block during wiring.
4) Mount the front panel back.
※
Refer to the Chapter 3.2.5 Electrical wiring for power cable connection.
1 2 3
PE
N
L
6
5
4
7
Rubber grommet
Signal cable entry
Strain relief
Power supply cable entry
(to be connected to the user's equipment)
IDFA60-23-T, IDFA70-23-T
IDFA80-23-T, IDFA90-23-T
Screws for connecting terminal block:
M3.5
Crimp terminal width: 8.5mm or less
Screws for connecting terminal block:
M4.0
Crimp terminal width: 9.5mm or less
Signal cable terminal
Front panel
Summary of Contents for IDFA60-23-A
Page 36: ...IDX OM V020 Chapter 7 Documents 7 5 Air Refrigerant Circuit IDFA60 70 80 90 Series 7 6...
Page 52: ......
Page 53: ......