SMC Networks CE2, User Manual

Page: 42 / 53

３９
After reviewing of number of brake operation, press
WRITE to switch to next input operation. The display
will indicate PRG STEP P7 and present origin
detection time.
Next, enter desired origin detection time. The setting
range is 0
～
9.99sec (1 unit as 10msec). Set the date
with taking into the consideration of cylinder
operating conditions.
After the above setting, press WRITE to switch to
next input operation. The display will indicate PRG
STEP P8 and present operating error detection time.
Next, enter desired operating error detection time.
The setting range is 0
～
9.99sec (1 unit as 10msec).
Set the data with taking into the consideration of
cylinder operating conditions.
After the above setting, press WRITE to end the
whole preset operation.
9-1-3 Confirmation of Set Data
Turn the controller switching mode to PRESET.
ＰＲＧ ＳＴＥＰ Ｐ７
″
″
″
〟
２００
Blinking
ＰＲＧ ＳＴＥＰ Ｐ８
″
″
″
〟
Blinking
２００
ＰＲＧ ＳＴＥＰ Ｐ１
″
″
″
〟
１０００．０
″
″
″
〟
UP DOWN
P1 P2 P3 P4 P8 P5 P6 P7
When P1 is blinking, use UP & DOWN key to
reconfirm each and individual preset value.
When the input value is blinking, press READ
once to shift the operation back to P1.