43
First, press LEFT one time.
Next, use DOWN to set the value of
“8”.
Press LEFT one time.
Then, use DOWN to set the value of
“6”.
Press WRITE one time.
Press UP 5 times to set the value of
“5”.
Press LEFT 2 times.
Press UP 3 times to set the value of
“3”.
Press WRITE to enter input STEP 3, which is the
end of program 8.
Press END to the program setting for program 8.
Program 8
’s programming ends.
9-2-2 Confirmation of Input Data
Turn the controller switching mode to PROGRAM.
When PRG
“1” is blinking, use UP & DOWN to
select desired program to be checked.
Next, press READ to proceed to the specified
program’s STEP “1”.
Then, use UP & DOWN to check and confirm every
step.
PRG 8
STEP 1
″
″
″
〟
0068.0
Blinking
PRG 8
STEP 2
″
″
″
〟
0000.0
Blinking
PRG 8
STEP 2
″
″
″
〟
0030.5
Blinking
PRG 8
STEP 3
″
″
″
〟
0000.0
Blinking
PRG 8
STEP 1
0068.0
″
″
″
〟
Blinking
PRG 1
STEP 1
0050.0
″
″
″
〟
Blinking
Summary of Contents for CE2
