SMC Networks AMS20 Operation Manual Download Page 84

Page: 84 / 137

-83-

No.PF

※※

-OMA1007

■

[F80] Set display OFF mode

This function will turn the display OFF if no buttons are pressed for 30 seconds.

<Operation>

Display [F80] by pressing the UP or DOWN button in function selection mode.

Press the SET button.

Move on to select display OFF mode.

Select display OFF mode

Press the UP or DOWN button to select display OFF function.

Press the SET button to set.

Return to function selection mode.

[F80] Setting of display OFF mode completed

∗

: In display OFF mode, the under bar of the sub display flashes.

∗

: When any button is activated, the display will turn on. If no button operation is performed

within 30 seconds, the display will turn off again.

Summary of Contents for AMS20










































































































































Search results

Summary of Contents for AMS20

Reviews:

Related manuals for AMS20

Brands by name

Popular brands

SMC Networks AMS20, Operation Manual

Search results

Summary of Contents for AMS20

Reviews:

Related manuals for AMS20

Brands by name

Popular brands