Field
Description
If select
Use DHCP
, the router is a DHCP client, the WAN IP address is
assigned by the remote DHCP server.
Local IP Address
It is the IP address of WAN interface which is provided by your ISP.
Remote IP Address
This is the gateway IP address which is provided by your ISP.
Subnet Mask
It is the subnet mask of the local IP address.
Unnumbered
Select it to enable IP unnumbered function.
Default Route
Add
After configuring the parameters of this page, click it to add a new PVC into
the current ATM VC table.
Modify
Select a PVC in the current ATM VC table, then modify the parameters of this
PVC. After finishing, click it to apply the change of this PVC.
Delete
Select a PVC in the current ATM VC table, then click it to delete this PVC.
Undo
Click it to refresh the page.
ATM Settings
Click it, the
ATM Settngs
page appears. You can configure the parameters of
the ATM for the router, including Qos type, PCR, CDVT, SCR and MBS.
Click
in the
PPPoE
mode. The page shown in the following figure appears. In this page, you can configure
parameters of this 1483 routed PVC.
The following table describes the parameters and buttons of this page.
Field
Description
PPP Interface
The preset identifier of the PPP Interface.
Protocol
The protocol type used for this WAN connection.
ATM VCC
The ATM virtual circuit connection assigned for this PPP interface (VPI/VCI).
33
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...
