![background image](http://html.mh-extra.com/html/smc-networks/7901wbra2-fiche/7901wbra2-fiche_user-manual_1300210047.webp)
The following table describes the parameters of this page.
Field
Description
Fragment Threshold
This is the maximum data fragment size (between 256 and 2346bytes) that can be sent
in the wireless network before the router fragments the packet into smaller data frames.
RTS Threshold
Request to send (RTS) is designed to prevent collisions due to hidden node. A RTS
defines the biggest size data frame you can send before a RTS handshake invoked. The
RTS threshold value is between 0 and 2347.
If the RTS threshold value is greater than the fragment threshold value, the RTS
hankshake do not occur. Because the data frames are fragmented before they reach the
RTS size.
Beacon Interval
The amount of time between beacon transmissions. A beacon is a packet broadcast by
the access point to keep the network synchronized, and it can identify the presence of
an access point.
Preamble Type
Choose whether to use a long or short PLCP preamble to create the PLCP protocol data
unit (PPDU). It is recommended to select
Auto
.
Relay Interval
Select
Enable
, connected clients can not communicate with each other within the local
wireless network.
LAN/WLAN Interval
Select
Enable
, connected clients can not communicate with each other within the local
wireless network.
Apply Changes
Save the changes of this page.
3.5.4
Access Control
Choose
WLAN > Access Control
. The page shown in the following figure appears. In this page, you can configure
the wireless access control.
29
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...