Field
Description
messages.
Select
RIP1
indicates the router receives RIP v1 messages.
Select
RIP2
indicates the router receives RIP v2 messages.
Select
Both
indicates the router receives RIP v1 and RIP v2 messages.
Send Mode
The working mode for sending RIP messages. You can choose
None
,
RIP1
,
RIP2
, or
RIP1 COMPAT
.
Select
None
indicates the router transmits neither RIP v1 nor RIP v2
messages.
Select
RIP1
indicates the router broadcasts RIP1 messages only.
Select
RIP2
indicates the router multicasts RIP2 messages only.
Select
RIP1 COMPAT
indicates the router broadcasts RIP2 messages.
Add
Click it to add the RIP interface to the RIP configuration table.
Delete Selected Entry
Select a row in the RIP Config Table and click it to delete the row.
RIP Configuration Table
A list of the router interfaces that enble RIP.
3.7.5
IP QOS
Choose
Advance > IP QOS
. The page shown in the following figure appears. Entries in this table are used to
assign the precedence for each incoming packet based on physical LAN port, TCP/UDP port number, and
source/destination IP address/subnet masks.
Click
Add Rule
, the page shown in the following figure appears.
44
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...
