3.7.4.2
RIP
Click
RIP
in the left pane. The page shown in the following figure appears. If you are using this device as a
RIP-enabled router to communicate with others who is using the Routing Information Protocol (RIP), enable the
RIP. This page is used to select the interfaces on your devices that use RIP, and the version of the protocol used.
The following table describes the parameters and buttons of this page.
Field
Description
RIP
Select
Enable
, the router communicates with other RIP-enabled devices.
Apply Changes
Save the settings of this page.
Interface
The router interface that uses RIP.
Receive Mode
The interface type to accept RIP messages. You can choose
None
,
RIP1
,
RIP2
,
or
Both
.
Select
None
indicates the router receives neither RIP v1 nor RIP v2
43
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...