3.7.4
Routing
Choose
Advance > Routing
. The page shown in the following figure appears. The page that is displayed contains
Static Route
and
RIP.
3.7.4.1
Static Route
Click
Static Route
in the left pane. The page shown in the following figure appears. In this page, you can configure
the routing information. You can add or delete IP routes.
The following table describes the parameters and buttons of this page.
Field
Description
Enable
Select it to use static IP routes.
Destination
Enter the IP address of the destination device.
Subnet Mask
Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to the destination device.
Metric
The metric cost for the destination.
Interface
The interface for the specified route.
Add Route
Click it to add the new static route to the table.
Update
Select a row in the table to populate the configuration fields with that row’s values. Make
any necessary changes to those values and click it
to save those changes.
Delete Selected
Select a row in the table and click it
to delete the row.
Show Routes
Click it, the
IP Route Table
appears. You can view a list of destination routes commonly
accessed by your network.
Static Route Table
A list of the previously configured static IP routes.
Click
Show Routes
. The table shown in the following figure appears. The table shows a list of destination routes
commonly accessed by your network.
42
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...
