![background image](http://html.mh-extra.com/html/smc-networks/7901wbra2-fiche/7901wbra2-fiche_user-manual_1300210028.webp)
The following table describes the parameters and buttons in this page.
Field
Description
Country
Select the country in which you are in.
Internet Service Provider Select
your
ISP.
Protocol
Select the protocol. You can choose
PPPoE
,
PPPoA
,
1483 MER:
DHCP
,
1483
MER: Static IP
,
1483 Bridged
,
or
1483 Routed
.
Connection Type
Select the connection type provided by your ISP from the drop-down list box.
You can choose
LLC
or
VC-Mux
.
VPI
The virtual path between two points in an ATM network, and its valid value is
from 0 to 255.
VCI
The virtual channel between two points in an ATM network, ranging from 32 to
65535 (0 to 31 is reserved for local management of ATM traffic).
Before you configure the protocol, you must select the country in which you are in and your ISP.
PPPoE
If the uplink equipment supports the
PPPoE
protocol, you can set the device to initiate the PPPoE dialup.
After finishing the settings, click
NEXT
. The page shown in the following figure appears.
10
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...