The following table describes the parameters and buttons of this page.
Field
Description
Source IP
The IP address of the source data packet.
Source Netmask
The subnet mask of the source IP address.
Destination IP
The IP address of the destination data packet.
Destination Netmask
The subnet mask of the destination IP address.
Source Port
The port of the source data packet.
Destination Port
The port of the destination data packet.
Protocol
The protocol responds to the IP QoS rules. You can choose
TCP
,
UDP
, or
ICMP
.
Physical Port
The LAN interface responds to the IP QoS rules, including four LAN interfaces, one
AP interface, and four virtual AP interfaces.
Outbound Priority
The priority of the IP QoS rules. P0 is the highest priority and P3 is the lowest.
QoS Tag
Select it to enable QoS tagging.
IP Precedence
You can choose from 0 to 7 define the priority in the ToS of the IP data packet.
IP ToS
The type of IP ToS for classifying the data package
You can choose
Normal Service
,
Minimize Cost
,
Maximize Reliability
,
Maximize
Throughput
,
or
Minimize Delay
.
802.1p
You can choose from 1 to 7.
Apply Changes
Save the settings of this page.
3.7.6
Anti-DOS
Choose
Advance
>
Anti-DOS
. The page shown in the following figure appears. Denial-of-service attack (DoS
Attack) is a type of attack on a network that is designed to bring the network to its knees by flooding it with useless
traffic. In this page, you can prevent DoS attacks.
45
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...
