Click
Apply Changes
to save the settings of this page.
3.7.7
Port Mapping
Choose
Advance
>
Port Mapping
. The page shown in the following figure appears. In this page, you can bind the
WAN interface and the LAN interface to the same group.
The procedure for manipulate a mapping group is as follows:
Step 1
Select
Enable
to enable this function.
Step 2
Select a group from the table.
Step 3
Select interfaces from the WAN and LAN interface list and add them to the grouped interface list using the
arrow buttons to manipulate the required mapping of the ports.
Step 4
Click
Apply Changes
to save the changes.
46
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...
