SMC Networks 7901WBRA2 FICHE, User Manual

Page: 23 / 89

2 Hardware Installation
Step 1
Connect the
Line
interface of the device and the
Modem
interface of the splitter through a telephone cable.
Connect the phone to the
Phone
interface of the splitter through a cable. Connect the incoming line to the
Line
interface of the splitter.
The splitter has three interfaces:
–
Line
: Connect to a wall phone jack (RJ-11 jack)
–
Modem
: Connect to the ADSL jack of the device
–
Phone
: Connect to a telephone set.
Step 2
Connect the
Ethernet
interface of the device to the network card of the PC through an Ethernet cable
(MDI/MDIX).
I Note:
Use twisted-pair cables to connect with the hub or switch.
Step 3
Plug one end of the power adapter to the wall outlet and connect the other end to the
PWR
interface of the
device.
Connection 1
Figure 1 displays the application diagram for the connection of the router, PC, splitter and the telephone sets, when
no telephone set is placed before the splitter.
Figure 1 Connection Diagram (without connecting telephone sets before the splitter)
Connection 2
Figure 2 displays the application diagram for the connection of the router, PC, splitter and the telephone sets, when
a telephone set is placed before the splitter.
5