The following table describes the parameters and buttons of this page.
Field
Description
Rule Action
Select
Deny
to exclude traffic from the identified IP address and port.
Select
Allow
to permit traffic from the identified IP address and port.
Direction
Choose whether the rule applies to incoming or outgoing traffic.
Protocol
The protocol of the incoming or outgoing traffic. You can choose
TCP
,
UDP
, or
ICMP
.
Src IP Address
The source IP address for which traffic is allowed or denied.
Src Subnet Mask
The subnet mask of the source IP address for which traffic is allowed or denied.
Src Port
The port of the source IP address for which traffic is allowed or denied.
Dst IP Address
The destination IP address for which traffic is allowed or denied.
Dst Subnet Mask
The subnet mask of the destination IP address for which traffic is allowed or denied.
Dst Port
The port of the destination IP address for which traffic is allowed or denied.
Add
Click it to add the rule to the table.
3.7.2.2
MAC Filter
Click
MAC Filter
in the left pane. The page shown in the following figure appears. Entries in this table are used to
restrict certain types of data packets from your local network to Internet through the gateway. These filters are
helpful in securing or restricting your local network.
38
Summary of Contents for 7901WBRA2 FICHE
Page 89: ...SMC7901WBRA2 ...