![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178459.webp)
GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
4-219
switchport gvrp
This command enables GVRP for a port. Use the
no
form to disable it.
Syntax
[
no
]
switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
show gvrp configuration
This command shows if GVRP is enabled.
Syntax
show gvrp configuration
[
interface
]
interface
•
ethernet
unit
/
port
- unit - Stack unit. (This is unit 1)
- port - Port number. (Range: 1-52)
•
port-channel
channel-id
(Range: 1-4)
Default Setting
Shows both global and interface-specific configuration.
Command Mode
Normal Exec, Privileged Exec
Example
Console(config)#interface ethernet 1/6
Console(config-if)#switchport gvrp
Console(config-if)#
Console#show gvrp configuration ethernet 1/6
Eth 1/ 6:
GVRP configuration: Enabled
Console#
Summary of Contents for 6752AL2 - annexe 1
