![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178200.webp)
C
ONFIGURING
THE
S
WITCH
3-152
Command Attributes
•
VLAN
– ID of configured VLAN (1-4094).
•
Name
– Name of the VLAN (1 to 32 characters).
•
Status
– Enables or disables the specified VLAN.
-
Enable
: VLAN is operational.
-
Disable
: VLAN is suspended; i.e., does not pass packets.
•
Port
– Port identifier.
•
Membership Type
– Select VLAN membership for each interface by
marking the appropriate radio button for a port or trunk:
-
Tagged
: Interface is a member of the VLAN. All packets
transmitted by the port will be tagged, that is, carry a tag and
therefore carry VLAN or CoS information.
-
Untagged
: Interface is a member of the VLAN. All packets
transmitted by the port will be untagged, that is, not carry a tag and
therefore not carry VLAN or CoS information. Note that an
interface must be assigned to at least one group as an untagged port.
-
Forbidden
: Interface is forbidden from automatically joining the
VLAN via GVRP. For more information, see “Automatic VLAN
Registration” on page 3-144.
-
None
: Interface is not a member of the VLAN. Packets associated
with this VLAN will not be transmitted by the interface.
•
Trunk Member
– Indicates if a port is a member of a trunk. To add a
trunk to the selected VLAN, use the last table on the VLAN Static
Table page.
Summary of Contents for 6752AL2 - annexe 1
