![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178352.webp)
C
OMMAND
L
INE
I
NTERFACE
4-112
Example
dot1x timeout quiet-period
This command sets the time that a switch port waits after the Max Request
Count has been exceeded before attempting to acquire a new client. Use
the
no
form to reset the default.
Syntax
dot1x timeout quiet-period
seconds
no dot1x timeout quiet-period
seconds -
The number of seconds. (Range: 1-65535)
Default
60 seconds
Command Mode
Interface Configuration
Example
dot1x timeout re-authperiod
This command sets the time period after which a connected client must be
re-authenticated.
Syntax
dot1x timeout re-authperiod
seconds
no dot1x timeout re-authperiod
seconds -
The number of seconds. (Range: 1-65535)
Default
3600 seconds
Console(config)#interface eth 1/2
Console(config-if)#dot1x re-authentication
Console(config-if)#
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout quiet-period 350
Console(config-if)#
Summary of Contents for 6752AL2 - annexe 1
