![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178455.webp)
VLAN C
OMMANDS
4-215
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
All ports assigned to an isolated VLAN can pass traffic between group
members, but must communicate with resources outside of the group
via a promiscuous port.
Example
switchport private-vlan mapping
Use this command to map an interface to a primary VLAN. Use the
no
form to remove this mapping.
Syntax
switchport private-vlan mapping
primary-vlan-id
no switchport private-vlan mapping
primary-vlan-id
– ID of primary VLAN. (Range: 1-4094).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Promiscuous ports assigned to a primary VLAN can communicate with
any other promiscuous ports in the same VLAN, and with the group
members within any associated secondary VLANs.
Example
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan isolated 3
Console(config-if)#
Console(config)#interface ethernet 1/2
Console(config-if)#switchport private-vlan mapping 2
Console(config-if)#
Summary of Contents for 6752AL2 - annexe 1
