![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178453.webp)
VLAN C
OMMANDS
4-213
switchport mode private-vlan
Use this command to set the private VLAN mode for an interface. Use the
no
form to restore the default setting.
Syntax
switchport mode private-vlan
{
host
|
promiscuous
}
no switchport mode private-vlan
•
host
– This port type can subsequently be assigned to a community
or isolated VLAN.
•
promiscuous
– This port type can communicate with all other
promiscuous ports in the same primary VLAN, as well as with all
the ports in the associated secondary VLANs.
Default Setting
Normal VLAN
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
To assign a host port to a community VLAN, use the
private-vlan
host association
command. To assign a host port to an isolated
VLAN, use the
switchport private-vlan isolated
command.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#switchport mode private-vlan promiscuous
Console(config-if)#exit
Console(config)#interface ethernet 1/3
Console(config-if)#switchport mode private-vlan host
Console(config-if)#
Summary of Contents for 6752AL2 - annexe 1
