![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178038.webp)
I
NITIAL
C
ONFIGURATION
2-2
The switch’s Web interface, CLI configuration program, and SNMP agent
allow you to perform the following management functions:
•
Set user names and passwords for up to 16 users
•
Set an IP interface for a management VLAN
•
Configure SNMP parameters
•
Enable/disable any port
•
Set the speed/duplex mode for any port
•
Configure the bandwidth of any port by limiting input or output rates
•
Control port access through IEEE 802.1X security or static address
filtering
•
Filter packets using Access Control Lists (ACLs)
•
Configure up to 255 IEEE 802.1Q VLANs
•
Enable GVRP automatic VLAN registration
•
Configure IGMP multicast filtering
•
Upload and download system firmware via TFTP
•
Upload and download switch configuration files via TFTP
•
Configure Spanning Tree parameters
•
Configure Class of Service (CoS) priority queuing
•
Configure up to 4 static or LACP trunks
•
Enable port mirroring
•
Set broadcast storm control on any port
•
Display system information and statistics
•
Configure any stack unit through the same IP address
Required Connections
The switch provides an RS-232 serial port that enables a connection to a
PC or terminal for monitoring and configuring the switch. A null-modem
console cable is provided with the switch.
Note:
When configuring a stack, connect to the console port on the
Master unit.
Summary of Contents for 6752AL2 - annexe 1
